Coatings

BRIGHTSMITH Coaters is capable and experienced in handling a wide variety of paint systems to meet customer needs. BRIGHTSMITH Trenton focuses on liquid and powder coatings with systems such as Fluoropolymer, Polyester, Epoxy, and Acrylic. BRIGHTSMITH Morrisville deals with liquid coil coating services. Some common coil coating systems include Fluoropolymer, Polyester, SMP, Plastisol, Polyurethane, and Epoxy systems. The BRIGHTSMITH Coil Coating location also offers extensive print and laminating capabilities to meet all customer needs. Contact BRIGHTSMITH to explore options for your next project.

STANDARD COLORS (PVDF Finish)

PVDF resin based coatings provide high-performance durability for exterior and interior applications. These coatings are designed to resist fading, chalking, and abrasion.

Meets the requirement of AAMA 6205 and AAMA 620

*Custom colors and other coatings available upon request. Please contact BRIGHTSMITH for details

Black

Forest Green

Chocolate Brown

Sierra Tan

Sandstone

Rocky Grey

Ascot White

Classic Bronze

Teal

Boysenberry

Rawhide

Regal Blue

Charcoal Grey

Bone White

Medium Bronze

Hemlock Green

Redwood

Concord Cream

Slate Blue

Slate Grey

Hartford Green

Patina Green

Mission Red

Almond

Siam Blue

Dove Grey

 

PREMIUM FINISH (PVDF Finish)

PVDF resin based coatings, as noted above, with premium pigmentation to obtain metallic or deep color for desired aesthetics.

Antique Patina

Champagne

Coppertone

Titanium

Silversmith

Brite Red

Click here to download color chart PDF

Notes:

(1) Flexible to point of metal rupture without rupture of coating.
(2) No loss of adhesion between coating and substrate to point of metal rupture with 1/16” cross-hatch scribe pattern through coating to bare metal.
(3) No objectionable chalking, color change or blistering.
(4) No No. 8 size blisters.

(5) Aluminum: none or few No. 8 size blisters, not more than 1/16” avg. creep or tape off scribe.
Metallic coated steel: none or few No. 8 size blisters, not more than 1/8” avg. creep or tape off scribe.
(6) No blistering and no rating less than 5 per ASTM D 714; no rusting per ASTM D 610; Rating of 6, less than 1.5 mm creepage from scribe per ASTM D 1654.
 

Limitations:

All BRIGHTSMITH materials are pre-finished and, therefore, care should be taken during fabrication and installation of materials. Fabrication and installation of materials should conform to standards established by the architectural sheet metal community. During the fabrication and/or forming of the materials, proper bend radii must be used. For damage other than minor scratches, such as dents, deep abrasions, or scratches which have damaged base materials, the actual unit should be replaced. All metal shavings, chips, and dust must be removed from material immediately.

Colors are as close to the actual colors as modern printing allows. Metal color chips on request; this is a requirement for all premium colors. If you have requirements or preference for colors or finishes other than shown, contact BRIGHTSMITH. BRIGHTSMITH is not responsible for colors selected from this chart. BRIGHTSMITH reserves the right to modify, eliminate and/or change its color offering without prior notification. Contact BRIGHTSMITH for more information.
© 2016 BRIGHTSMITH COATERS LRD0716 BCCL002